productspicturesvideofeed back

introduction of Hammer crusher:

Hammer crusher manufactured by Shanghai Shibang Machinery Co., Ltd. is characterized by simple structure, great reduction ratio, high productivity while saving energy, stable operation, low noise and small blast capacity, etc. It is applicable for both dry and wet crushing.

PCH hammer crusher manufactured by Shanghai Shibang Machinery Co., Ltd. is characterized by simple structure, great reduction ratio, high productivity while saving energy, stable operation, low noise and small blast capacity, etc. It is applicable for both dry and wet crushing.

Hammer Crusher is widely used for medium or fine crushing for medium hard and brittle materials by departments of mine, cement, coal, building material, metallurgy, chemical industry, road construction, gas chemical industry and thermal power generation, etc. Coal gangue, coke, slag, limestone, phosphate rock, salt, whiting, gypsum stains, alum, brick and tile, etc. can be crushed by this equipment. The compression strength of the materials shall not exceed 100MPa, while the moisture content shall be lower than 15%. The equipment can be also used for crushing chips and paper with fiber structure and strong elasticity and ductility, or recycling asbestos fiber by crushing wastes of asbestos cement, etc. Gap between the gratings are adjustable to change grain size of the discharge, so as to meet different requirements of the customers.

Hydraulic Hammers Application:

This series of new European-style hydraulic hammer crusher is widely used in metallurgy, mine, chemical, cement, coal dry stone, construction, sand making, refractory materials and ceramic industries. Used for secondary crusher or tertiary crushing, it mainly suitable for crushing various ores the compressive strength of which is no more than 320MPa. SBM is independent research and development with high-tech of the hammers crusher and provides hydraulic hammer for sale.

Working principle:

PCH hammer crusher is a kind of rotor impact crusher containing ring hammer. Its main component is the rotor containing hammer (also called hammerhead).The rotor is composed of main shaft, disk, pin and hammer. It is driven by motor to rotate rapidly in the crushing cavity. The materials are delivered through upper feed inlet into the equipment, and crushed by knocking, impact, shearing and grinding by the quickly moving hammer. The crushed materials with grain size smaller than the mesh opening will be discharged through screen plate on the lower part of the rotor, while those with grain size larger than the mesh are left on the screen plate to undergo impact and grinding by the hammer, and finally discharged through the screen plate.

Through such a promising cooperation with SBM company, I think we should built strong partership during My entire career. -- Doug Perkins, Project Director

Detail Specification Catalogue of Hydraulic Hammers :

Model	PC4008-75	PC4012-90	PC4015-132
Diameter of the rotor(mm)	750	900	1150
Length of the rotor(mm)	800	1200	1500
Rotation speed of the rotor (r/min)	800-1000	800-1000	700-1000
Max. input size(mm)	<30	<40	<50
Max. output size(mm)	0-3	0-3	0-8
Capacity (t/h)	8-15	15-35	40-70
Motor power(Kw)	75	90	132
No. of the hammers(piece)	10	16	24
Dimension(L*W*H/mm)	2300*1665*1610	2840*2100*2020	3720*2650*2540
Inlet size(mm)	320*930	400*1200	500*1500

Note: This specification is just reference, any changes are subject to the products.