productspicturesvideofeed back

introduction of SCM super thin mill:

SCM series super thin mill is on the bases of our company's production experience for more than 15 years. We absorb advantags from the same trade abroad and at home. We review, research and try on 12 kinds of mills and horizontal hammer crushers. And finally we developed this high-efficiency and low-cost super thin mill by investigation and trial.

This grinding mill is a equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone.

This grinding mill is mainly composed of host machine, redactor, separator, fan, cloth dust controller, piping device, integrated device, and electric engine etc. The whole set of equipment is composed of jaw crusher, belt bucket-elevator, feeder machine, storage silo, electrical control tank etc. It is mainly applicable for grinding of mineral materials used in metallurgy, construction , chemical engineering, mining etc and various non-inflammable and non-explosive mineral materials with Mohs' scale of hardness less than grade 9 and moisture 6%.

Performance features of SCM super thin mill:

1. It can be applied in a wider range than airflow miller.

2. Compared with other micronizers, the rolling pressure upon materials form grinding roller with the help of high-pressure spring has increased 800-1200 kg.

3. Energy saving. In the case of the same output and fineness, its energy consumption is only one third of that of airflow miller.

4. Smaller investment and more benefit. In the case of the same output and fineness, the price is only one eighth of that of airflow miller.

5. It can be fed with large particles. The average diameter of discharged particles after being milled for once is below < 6.5um.

6. The grinding setting adopts superposed multilevel sealing. So it has good sealing.

7. The dust cleaning meets the state dust discharging standard.

Repair and maintenance of SCM super thin mill:

1. Lubricate the centre bearing of the host machine every 4 shifts and the bearing of blower every month.

2. The temperature of bearing chamber shall be no more than 70℃.

3. When changes the roller sleeve, it is necessary to clean the bearing of the roller and bearing chamber.

4. Proper play is required when assembling bearings. (No informing, if there is any change of technical data.)

The grinding mills from SBM produce the right size powder our company need. The grinding mill is noise-less and high efficiency-- Grover, Project Director

Detail Specification Catalogue of SCM super thin mill:

Model	SCM6015	SCM8021	SCM10027
Roller number	15	21	27
Diameter (mm)	Φ600	Φ800	Φ1000
Ring number(piece)	1×3	1×3	1×3
Main unit speed(mm)	235	235	173
Max. feeding size(mm)	10	10	20
Final size (mesh)	325-2500	325-2500	325-2500
Capacity (kg/h)	325-2500	600-4000	900-6800
Overall dimension (m)	10×2.3×5.5	13×3×5.8	18×4×8.6

Name		Unit	Specification and technical data
			SCM6015	SCM8021	SCM10027
Motor of main unit	Model		Y225S-4	Y250M-4	Y315S-4
	Power	Kw	37	55	110
Adjustable motor of classifier	Model		Y160M-4	Y180M-4	Y200L1-4
	Power	Kw	11	18.5	30
Motor of elevator	Model		Y100L-4	Y100L-4	Y100L-4
	Power	Kw	3	3	3
Motor of blower	Model		Y200L1-2	Y225M-2	Y280M-2
	Power	Kw	30	45	90
Hammer crusher	Model		PC250×400	PC300×400	PC400×600
	Power	Kw	15	15	18.5
Vibrating feeder	Model		GZ1F	GZ1F	LS180×1050
	Power	Kw	0.06	0.06	2.2
Unload valve	Model		ZJD-1:40	ZJD-1:40	ZJD-1:40
	Power	Kw	0.75	0.75	0.75
Impulse dust cleaner	Model		DMC72-Ⅱ	DMC120-Ⅱ	DMC184-Ⅱ

Note: This specification is just reference, any changes are subject to the products.