productsfeed back

introduction of Rotary Kiln Dryer Plant:

The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern. In some cases, a combination of direct-indirect heated rotary dryers are also available to improve the overall efficiency.

Our clients come to our company from all over the world: America, Australia, Canada, Chile, China, Kazakhstan, Poland, Peru, Russia, Zambia, Congo, Namibia, South Africa, India, Iran, Japan, South Korea, Philippines, Italy, Uzbekistan, Austria, Germany, Romania, Spain, Sweden, England ...

The spare, backup and service support is also very important in mining project. Customers are assured that the technical supporter always come in time. -- John, Intermediary Agent

Drying Machine Specification

Model	Size of cylinder			Rotate Speed (r/min)	Power (kw)	Weight (kg)
	Diameter(mm)	Length(mm)	Angle of Inclination(%)
HG1012.00	1000	12000	5	6.2	7.5	13236
HG1212.00	1200	12000	5	5.99	11	15756
HG1512.00	1500	12000	5	4.02	15	17430
HG1814.00	1800	14000	5	4.59	18.5	27263
HG2014.00	2000	14000	5	4.59	18.5	31688
HG2214.00	2200	14000	5	4.59	22	37431
HG2414.00	2400	14000	5	3.6	30	46197
HG2818.00	2800	18000	5	3.12	45	89332
HG3020.00	3000	20000	5	3.67	55	95505
HG3222.00	3200	22000	5	3.4	75	141627
HG3624.00	3600	24000	5	3.1	110	188627
JHG1214.00	1200	14000	5	5.99	11	17382
JHG1816.00	1800	16000	5	5.48	22	39587
JHG2016.00	2000	16000	5	4.59	30	61912
JHG2227.00	2200	27000	5	4.58	37	79263
JHG2418.00	2400	18000	5	3.12	37	66735

Note: This specification is just reference, any changes are subject to the products