productspicturesvideofeed back

introduction of vibrating feeder:

Vibrating feeder consist of vibration mill, spring, pulsate, electric mill and the moto shaking device consist of two eccentric shaft. These gear wheels jogged. When installation you must make sure these gear wheels joggled according to the sign. The power drives these the accentric shafts circumrotate, which can produce huge power to force the mill vibrate on the spring.

It is usually used in joint facilities for crushing and screening in such fields as mining area, crushing fields, metallurgy, coal, concentration, building materials, chemical industry and grinding, etc.

Performance features of vibrating feeder:

Vibrating feeder bears such performance features as simple structure, stable vibration, even feeding, good continuity performance and adjustable exciting force; casual adjustment and control of feed quantity, convenient operation; using eccentric block as the exciting source, low noise, low power consumption, good adjustment performance, without punching materials; dust prevention if in closed body.

Working principle of vibrating feeder:

The feeder takes advantage of centrifugal force produced by rotation of the eccentric block in the vibrator to make the flexible parts of the screen such as screen box and vibrator in forced continuous circle or approximately circle movement. The materials do continuous throwing movement on the tilting screen surface with the screen box and by this the materials are fed continuously and evenly into the receiving opening.

The materials are bumping with each other when being sent between the plate hammer and the impact plate. The materials become cracked, loose and then comminuted by knocking by the plate hammer, impact with impact plate and bump between materials. The materials with grain size smaller than the gap between impact plate and plate hammer will be discharged.

SBM service is so good in Mexico, the on site installation and training lessons are quite helpful. -- Grover, Project Director

Detail Specification Catalogue of vibrating feeder:

Model	Max input size(mm)	capacity (t/h)	motor power (kw)	Installaition Slope	weight (kg)	Size of Funnel (mm)
GZD-180 × 80	300	30-80	2 × 1.5	0-10	0.8	1800 × 800
GZD-300 × 90	500	40-100	2 × 2.2	0-10	1.5	3000 × 900
ZSW-380 × 96	500	90-100	11	0°	3.98	3800 × 960
ZSW-490 × 96	500	120-240	15	0°	5.5	4900 × 960
ZSW-490 × 110	580	120-280	15	0°	5.72	4900 × 1100
ZSW-590 × 110	600	280-500	22	0°	6.13	5900 × 1100
ZSW-600 × 130	750	400-560	22	0°	7.8	6000 × 1300

Note: This specification is just reference, any changes are subject to the products